NOTHING ABOVE THIS LINE WILL APPEAR ON YOUR PAGE!
With Conklin’s innovative roof recoating systems, you can actually extend the life of your existing EPDM or Modified Bitumen roofing system and save on energy costs at the same time. These systems are an effective and economical alternative to a complete tear off or re-roofing project.
The EPDM/Modified Bitumen Recoating Systems consist of a three step process: WAC II™ roofing surface cleaner, Conklin Tack Coat™ surface primer and Conklin’s proven Rapid Roof® III reflective top coat. Used together as a system, these products allow you to fix leaks in your existing EPDM and Modified Bitumen roofs instead of replacing them. In fact, Conklin coating systems are sustainable indefinitely with periodic recoats.
The light colored coating of Rapid Roof III™ top coat reflects 84 of the sun’s energy from you EPDM or Modified Bitumen roof, compared to only five to seven percent of typical dark-colored roofs. The Conklin EPDM and Modified Bitumen Recoating Systems extend the life of your roof by shielding it from those harmful rays resulting in less shrinkage, reduced ultraviolet degradation and thus fewer leaks. The high reflectivity also lowers the temperature of your roof by as much as 30-50 degrees, which means less money spent cooling your building!
Our warranty program for your new Conklin roof system is extended with confidence. Conklin Company and Francis Bros., Inc have teamed up to guarantee a leak-proof system that will shield your building for years to come.
 | 10 year materials warranty: 3-step system with Rapid Roof III™ topcoat applied at 1.9 gallons per square. |
| 10 year joint warranty: 3-step system with Spunflex and Rapid Roof III™ topcoat applied at 1.9 gallons per square. |
WAC II™
Conklin’s WAC II™ high-strength roofing surface cleaner is an excellent product for most roof cleaning applications. WAC II™ effectively prepares aged EPDM and Modified Bitumen membranes prior to applying the Conklin EPDM or Modified Bitumen Recoating Systems.
Tack Coat™
Conklin Tack Coat™ promotes adhesion between properly cleaned EPDM and Modified Bitumen roofing membranes and Conklin’s Rapid Roof III™ 100% acrylic elastomeric roof coating. When used on aged EPDM and Modified Bitumen roofs cleaned with WAC II™ roof cleaner, Tack Coat™ effectively prepares the membrane to receive the highly reflective, energy-saving finish coat.
Rapid Roof III™
Rapid Roof III™, the third generation of Conklin's original roof coating system, is designed to be lightweight, flexible, seamless and weatherproof. Comprised of a fire classified light tan base coat and a highly reflective standard white top coat, it has a reflective value of 84%. Rapid Roof III™ cures to a tack-free, dirt-resistant finish. In addition to white, Rapid Roof III™™ is also available in light gray, light blue and light tan.
Website design © Kaci M. Lusk 2008
NOTHING BELOW THIS LINE WILL APPEAR ON YOUR PAGE!